⊙Thrust needle roller bearings AXK, AXW, AX, TC, NTB series
⊙Thrust roller bearings 811, 812, 893, 874, 894 series
⊙Thrust needle roller bearing or thrust cylindrical roller bearing is a type of roller bearing that is equipped with a cage between a set of raceway washers. The cage reliably guides and grips a large number of rolling elements, with only very small differences between the rolling elements in the same component. Thrust needle roller bearings or thrust cylindrical bearings can only support axial loads in one direction, and can be used as the bearing configuration with good rigidity and minimal axial space occupation.
⊙Thrust washer, shaft ring, seat ring
⊙Hrust washersAS LS GS WS ZS TRA TRB TRC TRD series
⊙The AS series thrust washers are stamped from high-quality spring steel, with a thickness of 1mm, and are hardened and polished. When the surface rigidity of adjacent components is good but not suitable for use as raceways, the AS series gasket fully plays its role.
⊙The GS, WS, LS series thrust washers are made of bearing steel and have undergone quenching treatment. The outer surface of the seat ring GS and the inner surface of the shaft ring WS are made by grinding. LS is a particularly economical vehicle with both exterior and interior surfaces.
⊙The ZS series thrust washers are available in our company. When components use bearing configurations that require bi-directional positioning, our company can provide the ZS middle ring series, which can be axially positioned or seat hole positioned.
⊙Thrust roller bearings 811, 812, 893, 874, 894 series
⊙Thrust needle roller bearing or thrust cylindrical roller bearing is a type of roller bearing that is equipped with a cage between a set of raceway washers. The cage reliably guides and grips a large number of rolling elements, with only very small differences between the rolling elements in the same component. Thrust needle roller bearings or thrust cylindrical bearings can only support axial loads in one direction, and can be used as the bearing configuration with good rigidity and minimal axial space occupation.
⊙Thrust washer, shaft ring, seat ring
⊙Hrust washersAS LS GS WS ZS TRA TRB TRC TRD series
⊙The AS series thrust washers are stamped from high-quality spring steel, with a thickness of 1mm, and are hardened and polished. When the surface rigidity of adjacent components is good but not suitable for use as raceways, the AS series gasket fully plays its role.
⊙The GS, WS, LS series thrust washers are made of bearing steel and have undergone quenching treatment. The outer surface of the seat ring GS and the inner surface of the shaft ring WS are made by grinding. LS is a particularly economical vehicle with both exterior and interior surfaces.
⊙The ZS series thrust washers are available in our company. When components use bearing configurations that require bi-directional positioning, our company can provide the ZS middle ring series, which can be axially positioned or seat hole positioned.